WPC Door Frame Manufacturers in Thiruvananthapuram

A Modern Door Frame Manufacturer for Thiruvananthapuram's Institutions

A large share of the capital's building stock is public: offices around the Secretariat, wards at the Medical College, and college and school blocks whose rotted timber frames have already been replaced more than once. As a door frame manufacturer that works only in WPC, we give these buildings a frame that does not swell through two monsoons or feed termites. Being a modern door frame manufacturer also means a choice of finish: painted for corridors, laminated for office cabins, and polished or PVC film for homes in Kowdiar and Sasthamangalam. For most flat and office openings, a WPC door frame in Thiruvananthapuram is specified in our 100×45 mm single-rebate section, with the 150×45, 90×38 and 75×35 mm sections available for the rest of the schedule.

Hollow WPC Door Frames in Thiruvananthapuram

Our hollow frames suit the long rows of rooms in IT-staff hostels around Kazhakootam and in student housing near the colleges. The hollow profile is lighter than solid wood, so a small crew can carry and fix more frames in a day, and it stays just as waterproof as our solid sections. As a hollow WPC door frame manufacturer, we still hold every frame to 110–140 kgf of screw-holding strength, which keeps hinges firm on doors that open all day. When comparing hollow WPC door frame manufacturers, ask for that figure on the datasheet before you order.

Fire-Resistant and FR WPC Door Frames in Thiruvananthapuram

For public buildings in the capital, the test certificate matters as much as the frame itself. As fire-resistant WPC door frame manufacturers, we test our frames to IS 3614 (Part 2), ASTM E 119 and BS 476 in 30, 60, 90 and 120-minute ratings, for staircases and corridors in hospitals, research institutions and Technopark office blocks. As FR WPC door frame manufacturers, we supply the certificates with every order, so the fire NOC file is complete before the first frame is fixed.

WPC Architraves in Thiruvananthapuram

Our architraves come in two profiles, a 45×18 mm front and a 30×12 mm rear, both up to 7 feet long and in every finish our frames are made in. We work as WPC architrave manufacturers in Thiruvananthapuram's market and as WPC architraves suppliers direct to site, making the trims in the same finishes as the frames. Buying WPC door frames and architraves in Thiruvananthapuram from one plant keeps the shade and grain matched, and unlike MDF the trims do not swell in the humid months between the two monsoons. Each side fixes in 10–15 minutes with polymer adhesive and stainless steel pin-nails.

WPC Door Frame with PVC Film Wrapping

Homes in Kowdiar, Vazhuthacaud and Pattom often want a timber look without the upkeep, and a WPC door frame with PVC film wrapping gives exactly that. The wood-grain film is bonded to the frame in our plant, so it comes finished from the factory and never needs polishing, however humid the season. Architraves are available in the same film.

Pre Hung Doors in Thiruvananthapuram

Pre hung doors in Thiruvananthapuram make the most sense where one room type repeats dozens of times, as in the hostels and apartment blocks going up for IT staff between Kazhakootam and Technocity at Pallippuram. As pre-hung door frame manufacturers, we assemble the door, frame and hinges at the plant, and each set fits in 30–45 minutes rather than the 4–6 hours of carpentry a loose frame and shutter need.

Moulded Panel, Laminated, Veneered and Bathroom Doors in Thiruvananthapuram

For staff rooms, office cabins and institutional corridors, we are a laminated door shades manufacturer with the FL-series (FL-30 to FL-121) in 0.8–1 mm high-pressure laminate, a face that takes daily knocks well. For flats and bungalows, we are a moulded panel doors (MPD) manufacturer offering HDF-skinned, solid-core doors in single, 2-panel, 3-panel and 4-panel designs. As a moulded panel doors manufacturer, we also make a moisture-sealed MPD grade for rooms that catch the damp.

For hotels and homestays in Kovalam and bungalows in Kowdiar, we work as decorative veneer door manufacturers, pressing teak, walnut, oak or rosewood veneer onto a WPC core. As a decorative veneered doors manufacturer, we polish every leaf at the factory in matte, semi-gloss or high-gloss. For toilets in hospitals, hostels and homes, we are a bathroom door manufacturer in Thiruvananthapuram's supply chain whose WPC doors are waterproof, so they do not rot at the base.

For large hostel orders, we are also hollow WPC doors manufacturers, since a lighter leaf eases handling and hinge loads. A 30mm WPC door in Thiruvananthapuram flats works well for bedrooms, kitchens and bathrooms because it resists moisture and needs no polish; for main entrances, we recommend a thicker solid-core leaf.

WPC Door Frame Installation in Thiruvananthapuram

WPC door frame installation in Thiruvananthapuram is carried out by your own site carpenters with ordinary tools, using our 8-step installation process. WPC cuts and drills like timber, so no special equipment is needed, and our technical team supports your site by phone and WhatsApp on anchoring, levelling and sealing. Pre-hung door packages are handled differently: for those, our team supports on-site installation so each door is hung, aligned and swinging freely before handover.