WPC Door Frame Manufacturers in Patna

Door Frame Manufacturer for Patna's New Apartments

We are a door frame manufacturer working only in WPC, because in Patna's low-lying colonies timber is the first thing to rot at the base. As a modern door frame manufacturer, we supply painted, polished, laminated and PVC film wrapped finishes that give a wood look without seasonal polishing. The most common WPC door frame in Patna apartment blocks is our 100×45 mm section for flat entrances, with the 90×38 mm single-rebate section used for bedrooms and the 150×45 mm double-rebate section kept for heavy main doors in independent houses around Danapur and Saguna More.

Hollow WPC Door Frames in Patna

Our hollow profiles suit Patna's student hostels, coaching buildings and rental flats, where hundreds of internal openings have to be fitted on a tight budget. The lighter profile is easier to carry up stairwells and quicker to handle on site, yet it stays waterproof and termite-proof like our solid sections. As a hollow WPC door frame manufacturer, we test every profile for screw-holding, and our frames hold 110–140 kgf, which is ample for standard hinges and mortise locks. That test record is one reason contractors choose us over other hollow WPC door frame manufacturers.

Fire-Resistant and FR WPC Door Frames in Patna

Hospitals, nursing homes and taller residential buildings in Patna need rated door assemblies for a fire NOC under NBC 2016. As fire-resistant WPC door frame manufacturers, we make frames rated for 30, 60, 90 and 120 minutes, tested to IS 3614 (Part 2), ASTM E 119 and BS 476. Builders specify them for staircases, lift lobbies and ward corridors, and as FR WPC door frame manufacturers we supply the test certificates with every order so your fire consultant can complete the NOC file.

WPC Architraves in Patna

As WPC architrave manufacturers in Patna's building market and direct WPC architraves suppliers to its sites, we make the 45×18 mm front trim and the 30×12 mm rear trim in exactly the same finishes as our frames. Ordering WPC door frames and architraves in Patna from a single supplier means the shade and grain match on every opening. WPC architraves in Patna flats also stay straight through the long humid monsoon, where MDF trims swell at the floor, and they fix with polymer adhesive and stainless steel pin-nails in 10–15 minutes per side.

WPC Door Frame with PVC Film Wrapping

A WPC door frame with PVC film wrapping has a wood-grain film bonded to it in our factory, so it comes finished from the factory and needs no polishing on site. In Patna, where paint on timber blisters after each wet season, the film simply wipes clean and keeps its colour. Families choose teak and walnut grains for living rooms, and the same film is available on our architraves.

Pre-Hung Doors in Patna

As pre-hung door frame manufacturers, we assemble the door, frame and hinges in our factory as one ready-to-fix unit. Pre hung doors in Patna's multi-storey apartment projects go in within 30–45 minutes each, against 4–6 hours for a door built on site, so developers towards Khagaul and Digha can finish floors faster and hand over flats on schedule.

Moulded Panel, Laminated, Veneered and Bathroom Doors in Patna

We are a moulded panel doors (MPD) manufacturer offering HDF-skinned doors with a solid core in six designs and 25–50 mm thicknesses, which give Patna flats a finished look at a moderate price. As a moulded panel doors manufacturer, we also make a moisture-sealed MPD grade for ground-floor homes in colonies that waterlog. As a laminated door shades manufacturer, we supply FL-30 to FL-121 shades in 0.8–1 mm high-pressure laminate for hospitals, clinics and coaching centres that see heavy daily use.

For bungalows and premium flats, we work as decorative veneer door manufacturers, pressing teak, walnut, oak or rosewood veneer onto a WPC core. As a decorative veneered doors manufacturer, we polish each leaf at the factory, so nothing needs finishing on site. For wet areas, we are a bathroom door manufacturer whose WPC doors are fully waterproof and do not rot at the base however often the floor is washed.

We are also hollow WPC doors manufacturers for hostels and large housing projects, where a lighter leaf keeps costs down. A 30mm WPC door in Patna homes is a sensible pick for bedrooms, kitchens and bathrooms, because it resists the monsoon damp and never needs polish. For main entrances, we recommend a thicker solid-core leaf.

WPC Door Frame Installation in Patna

WPC door frame installation in Patna is carried out by your own carpenters with standard tools, following our 8-step installation process. Our technical team answers questions on anchoring, levelling and sealing by phone and WhatsApp. For pre-hung door packages, our team supports on-site installation so every door is aligned, fixed and swinging correctly before handover.