Pathframe WPC door frame with hinge, supplied to sites in Telangana
Full Range for Telangana

WPC Door Frames, Doors and Architraves in Telangana

Pathframe is among the WPC door frame manufacturers in Telangana's market that make every part of the opening, from the frame to the door leaf and the trim. A pharma unit at Patancheru, a college in Warangal or a house in Karimnagar rarely buys WPC door frames in Telangana in isolation; the same order usually includes architraves, bathroom doors and fire-rated frames, and taking them from one range keeps the shade and grain consistent. Anyone looking for a WPC door frame near Telangana's hottest towns, such as Adilabad and Ramagundam, or the flood-prone Godavari banks at Bhadrachalam, gets products that do not crack in 45°C heat, do not rot in standing water and are termite-proof by material.

WPC Door Frames150×45, 100×45, 90×38 and 75×35 mm sections, up to 7 feet long
Hollow WPC Door FramesLighter hollow profile for staff quarters and internal doors
FR WPC Door Frames30, 60, 90 and 120-minute ratings with test certificates
WPC Architraves45×18 mm front and 30×12 mm rear profiles, up to 7 feet long
Pre-Hung Door FramesDoor, frame and hinges assembled at the factory; fitted in 30–45 minutes
WPC DoorsSolid and hollow WPC doors, including 30 mm leaves
Moulded Panel Doors (MPD)HDF-skinned doors in six panel designs, 25–50 mm thick
Laminated Door ShadesFL-30 to FL-121 shades in 0.8–1 mm high-pressure laminate
Decorative Veneered DoorsTeak, walnut, oak and rosewood veneers on a WPC core
Bathroom DoorsWaterproof WPC leaves for bathrooms, toilets and wash areas

Door Frame Manufacturer in Telangana for District Towns and Industry

As a door frame manufacturer that makes frames only in WPC, we build for the Deccan's extremes: May heat that splits seasoned wood, monsoon floods in the Godavari valley and black cotton soil full of termites. As a modern door frame manufacturer, we finish frames in paint, polish, laminate or PVC film, so they look like wood without needing it. The standard WPC door frame in Telangana houses is our 150×45 mm double-rebate section at the main door, while 100×45 and 90×38 mm single-rebate sections cover bedrooms, and the 75×35 mm section suits smaller internal openings.

Hollow WPC Door Frames in Telangana

Hollow profiles are lighter to carry and quicker to fix, which counts on long runs of identical quarters in the Singareni colonies around Kothagudem and Mancherial and the power-plant townships at Ramagundam. As a hollow WPC door frame manufacturer, we recommend them for internal doors in staff housing and hostels. Like other hollow WPC door frame manufacturers, we test screw-holding strength, and ours hold 110–140 kgf, so hinges stay tight for years.

Fire-Resistant and FR WPC Door Frames in Telangana

Pharma and life-science units around Genome Valley, district hospitals and college blocks all need rated doors on escape stairs before a fire NOC is granted. We are fire-resistant WPC door frame manufacturers with frames tested to IS 3614 (Part 2), ASTM E 119 and BS 476 in 30, 60, 90 and 120-minute ratings. As FR WPC door frame manufacturers, we supply the test certificates with every order, ready for the Telangana fire services file.

WPC Architraves in Telangana

We are WPC architrave manufacturers in Telangana's building market and WPC architraves suppliers to houses, offices and institutions, making a 45×18 mm front profile and a 30×12 mm rear profile up to 7 feet long. Ordering WPC door frames and architraves in Telangana from one maker means the shade and grain match exactly around every door. WPC architraves in Telangana homes stay flat through the monsoon, where MDF swells, and each side fixes with polymer adhesive and stainless steel pin-nails in 10–15 minutes.

WPC Door Frame with PVC Film Wrapping

A WPC door frame with PVC film wrapping has a wood-grain film bonded to it at our factory, so it comes finished and needs no polishing on site. In the coal-belt towns, where fly-ash dust settles on everything, the film simply wipes clean, and in the hot north there is no polish to blister. The same film is available on our architraves.

Pre-Hung Doors in Telangana

As pre-hung door frame manufacturers, we assemble the door, frame and hinges at the factory into a single unit. Pre hung doors in Telangana suit colliery and power-plant staff colonies, college hostels and repeat housing blocks: each set is fitted in 30–45 minutes, compared with 4–6 hours for a door built on site. Our team supports on-site installation for pre-hung packages.

Moulded Panel, Laminated, Veneered and Bathroom Doors in Telangana

As a moulded panel doors (MPD) manufacturer, we make solid-core HDF-skinned doors in six designs, including Oak, Horizon, Mahogany and Oval, from 25 to 50 mm thick. As a moulded panel doors manufacturer, we see them chosen for new homes in Warangal, Nizamabad and Khammam, and we offer a moisture-sealed grade for ground-floor rooms. As a laminated door shades manufacturer, we supply FL-30 to FL-121 shades in 0.8–1 mm high-pressure laminate for pharma offices, hospital wards and classrooms.

For larger homes and hotels, we are decorative veneer door manufacturers, pressing teak, walnut, oak or rosewood veneer onto a WPC core. As a decorative veneered doors manufacturer, we polish each leaf at the factory. As a bathroom door manufacturer for Telangana projects, we make fully waterproof WPC doors that do not rot at the base, even on floors washed every day.

We are also hollow WPC doors manufacturers, supplying lighter leaves for staff quarters and hostels. A 30mm WPC door in Telangana homes works well for bedrooms, kitchens and bathrooms: it resists moisture and never needs polish. For the main entrance, we recommend a thicker solid-core leaf.

WPC Door Frame Installation in Telangana

WPC door frame installation in Telangana is carried out by your own carpenters with standard tools, following our 8-step installation process. A fitter trims, mortises and drills each frame in 20–30 minutes, and our technical team answers anchoring, levelling and sealing questions by phone and WhatsApp for sites anywhere in the state. For pre-hung door packages, our team supports on-site installation.

Planning a Project in Telangana?

Send us your door schedule and site location. We'll recommend frame sections and quote a price for your project.

Or call +91 99241 32956

frequently asked questions

Answers That Build Clarity & Trust

Plain WPC frames are fixed by your own carpenters with standard carpentry tools, following our 8-step installation guide, and a trained fitter can trim, mortise and drill a frame in 20–30 minutes. Our technical team answers site questions by phone and WhatsApp. For pre-hung door packages in Telangana, our team supports on-site installation so every door is hung and working before handover.

Yes. Our WPC architraves come in 45×18 mm front and 30×12 mm rear profiles, in the same painted, polished, laminated and PVC film wrapped finishes as our frames, so the shade and grain match on every door. Frame, door and trim all come from one supplier. The architraves wipe clean of coal-belt dust and do not swell like MDF in the Godavari monsoon.