WPC Door Frame Manufacturers in Kolkata

Door Frame Manufacturer in Kolkata for Promoter Flats and New Town Towers

As a door frame manufacturer for Kolkata projects, we make frames only in WPC, so the swelling and termite damage that wooden chaukhats suffer in the city's humid air never start. As a modern door frame manufacturer, we finish frames in paint, polish, laminate or PVC film, giving a wood look that never needs repolishing. A typical WPC door frame in Kolkata promoter flats is the 100×45 mm single-rebate section for the flat entrance and the 90×38 mm section for bedrooms, while bungalows in Alipore and Ballygunge often choose the 150×45 mm double-rebate frame for the main door.

Hollow WPC Door Frames in Kolkata

The hollow profile keeps the waterproofing of solid WPC while taking out weight, which helps when frames have to be carried up the narrow stairs of an older north Kolkata building or up a tower core in Rajarhat. As a hollow WPC door frame manufacturer, we recommend it for internal doors in rental flats, student housing around Jadavpur and hospital staff quarters. As hollow WPC door frame manufacturers, we test this profile for screw-holding as well, and it holds 110–140 kgf, enough for normal hinges and locks.

Fire-Resistant and FR WPC Door Frames in Kolkata

As fire-resistant WPC door frame manufacturers, we make frames tested to IS 3614 (Part 2), ASTM E 119 and BS 476 for 30, 60, 90 and 120 minutes. Kolkata hospitals that treat patients from across eastern India, office towers in Salt Lake and New Town, and hotels around Park Street use them for staircases, lift lobbies and corridors. As FR WPC door frame manufacturers, we supply the test certificates with every order, ready for the fire NOC file.

WPC Architraves in Kolkata

We are WPC architrave manufacturers in Kolkata's supply market as well as WPC architraves suppliers to promoters, interior contractors and carpenters, with a 45×18 mm front profile and a 30×12 mm rear profile in the same finishes as our frames. Specifying WPC door frames and architraves in Kolkata flats from one maker keeps the shade and grain identical around every opening. WPC architraves in Kolkata homes also stay straight on old brick walls with rising damp, where MDF trims swell, and they fix with polymer adhesive and stainless steel pin-nails in 10–15 minutes per side.

WPC Door Frame with PVC Film Wrapping

A WPC door frame with PVC film wrapping has its wood-grain film bonded on at our factory, so it comes finished from the factory and needs no polishing on site. Kolkata buyers who like the deep mahogany and teak tones of the city's older houses can have that look on a frame that ignores monsoon humidity, and the film wipes clean with a damp cloth. The same film is available on our architraves.

Pre-Hung Doors in Kolkata

As pre-hung door frame manufacturers, we put the door, frame and hinges together at our factory as one unit. Pre hung doors in Kolkata suit New Town and Rajarhat towers and large promoter projects with repeated flat plans: each fits in 30–45 minutes rather than 4–6 hours of site carpentry, so door work keeps pace with the rest of the fit-out.

Moulded Panel, Laminated, Veneered and Bathroom Doors in Kolkata

We are a moulded panel doors (MPD) manufacturer offering HDF-skinned, solid-core doors in six designs, including Oak, Horizon and Mahogany, from 25 to 50 mm thick. As a moulded panel doors manufacturer, we suggest the moisture-sealed MPD grade for ground-floor flats that turn damp in the monsoon. As a laminated door shades manufacturer, we supply FL-30 to FL-121 shades in 0.8–1 mm high-pressure laminate for Kolkata hospitals, offices and schools.

For bungalows in Alipore and Ballygunge and for boutique hotels, we act as decorative veneer door manufacturers, pressing teak, walnut, oak or rosewood veneer onto a WPC core. As a decorative veneered doors manufacturer, we polish each leaf at the factory in the sheen you choose. As a bathroom door manufacturer, we make fully waterproof WPC doors for Kolkata bathrooms, which stay sound where timber shutters rot at the bottom rail.

We are also hollow WPC doors manufacturers for promoter projects that want a lighter, lower-cost leaf with less strain on the hinges. A 30mm WPC door in Kolkata flats works well for bedrooms, kitchens and bathrooms, since it resists moisture and never needs polish. For the flat entrance, choose a thicker solid-core leaf.

WPC Door Frame Installation in Kolkata

Your own carpenters fix plain frames with the saws and drills they already use, following our 8-step installation process, and a trained fitter trims, mortises and drills a frame in 20–30 minutes. Our technical team helps with anchoring, levelling and sealing by phone and WhatsApp. For pre-hung door packages, our team supports on-site installation so every door is aligned and closing properly before handover.