Pathframe WPC door frame with hinge, supplied to sites in Faridabad
Full Range for Faridabad

WPC Door Frames, Doors and Architraves in Faridabad

On an affordable housing project in Greater Faridabad or a factory block in IMT, the cost per door and the speed of fitting decide the specification, and both improve when one supplier covers the whole opening. Among WPC door frame manufacturers in Faridabad's market, we make the frame, the leaf and the architrave ourselves, so a tower or a factory office can be finished in one matched shade and grain. Developers buying WPC door frames in Faridabad get sections that survive standing water on low-lying ground floors, need no paint after a dusty summer and give termites nothing to eat. For families building on their own plots and looking for a WPC door frame near Faridabad, in Ballabgarh, Surajkund or along Mathura Road, the full range is below.

WPC Door Frames150×45, 100×45, 90×38 and 75×35 mm sections, up to 7 feet long
Hollow WPC Door FramesLighter hollow profile for internal doors in affordable flats
FR WPC Door Frames30, 60, 90 and 120-minute ratings with test certificates
WPC Architraves45×18 mm front and 30×12 mm rear profiles, up to 7 feet long
Pre-Hung Door FramesDoor, frame and hinges assembled at the factory; fitted in 30–45 minutes
WPC DoorsSolid and hollow core WPC doors, including 30 mm leaves
Moulded Panel Doors (MPD)HDF-skinned solid-core doors in six designs, 25–50 mm thick
Laminated Door ShadesFL-30 to FL-121 shades in 0.8–1 mm high-pressure laminate
Decorative Veneered DoorsTeak, walnut, oak and rosewood veneers on a WPC core
Bathroom DoorsWaterproof WPC leaves for bathrooms, toilets and ground-floor doors

Door Frame Manufacturer for Faridabad's Homes and Factories

As a door frame manufacturer that works only in WPC, we build for a city where cheap wooden frames saved money on day one and then had to be replaced a few years later. Our frames need no paint, polish or anti-termite treatment, and they carry a 25-year warranty against termites, warping and delamination. As a modern door frame manufacturer, we still offer painted, polished, laminated and PVC film finishes for buyers who want a particular look. The most economical WPC door frame in Faridabad flats is the 90×38 mm or 75×35 mm section for internal doors, with the 100×45 mm single-rebate or 150×45 mm double-rebate section at the flat or house entrance.

Hollow WPC Door Frames in Faridabad

Hollow WPC door frames in Faridabad bring the cost and weight of each opening down further, which suits affordable group housing with hundreds of identical internal doors. As a hollow WPC door frame manufacturer, we keep the same waterproof, termite-proof material in a lighter section that is easier to handle and quicker to fix. When comparing hollow WPC door frame manufacturers, ask for tested screw-holding; ours hold 110–140 kgf, enough for standard hinges and locks.

Fire-Resistant and FR WPC Door Frames in Faridabad

Factory buildings in the industrial sectors and IMT Faridabad often need rated doors on stairs, stores and plant rooms before a fire NOC is granted, and so do hospitals and group-housing towers. As fire-resistant WPC door frame manufacturers, we make frames rated for 30, 60, 90 and 120 minutes, tested to IS 3614 (Part 2), ASTM E 119 and BS 476. As FR WPC door frame manufacturers, we supply the certificates with every order for the NOC file.

WPC Architraves in Faridabad

We are WPC architrave manufacturers in Faridabad's supply market and WPC architraves suppliers to builders who want a finished edge without the cost of site carpentry. The 45×18 mm front and 30×12 mm rear profiles come up to 7 feet long in the same finishes as our frames. Ordering WPC door frames and architraves in Faridabad together keeps the shade and grain matched through a whole tower. WPC architraves in Faridabad ground-floor flats also survive the damp that makes MDF trims swell after flooding, and they fix with polymer adhesive and stainless steel pin-nails in 10–15 minutes per side.

WPC Door Frame with PVC Film Wrapping

A WPC door frame with PVC film wrapping has a wood-grain film bonded on at our factory, so it comes finished and needs no polishing on site. On a budget project, that removes the polishing stage altogether, and the film wipes clean of the summer dust from roads and industrial areas. The same film is available on our architraves.

Pre-Hung Doors in Faridabad

As pre-hung door frame manufacturers, we assemble the door, frame and hinges at our factory into one ready-to-fix unit. Pre hung doors in Faridabad's group-housing towers fit in 30–45 minutes each rather than 4–6 hours of site carpentry, which lowers the labour cost per door as well as the time to handover.

Moulded Panel, Laminated, Veneered and Bathroom Doors in Faridabad

We are a moulded panel doors (MPD) manufacturer with HDF-skinned, solid-core doors in six designs and 25–50 mm thicknesses, which give affordable flats a finished, uniform look at a modest price. As a moulded panel doors manufacturer, we offer a moisture-sealed grade for ground floors in low-lying sectors. As a laminated door shades manufacturer, we supply FL-30 to FL-121 shades in 0.8–1 mm high-pressure laminate for factory offices and worker housing, where doors are opened and slammed all day.

For plotted homes and villas around Surajkund, we work as decorative veneer door manufacturers, pressing teak, walnut, oak or rosewood veneer on a WPC core. As a decorative veneered doors manufacturer, we polish every leaf at the factory. For bathrooms and toilets, builders need a bathroom door manufacturer whose leaves are waterproof WPC throughout, and ours do not rot at the base.

We are also hollow WPC doors manufacturers for affordable housing, where a lighter leaf keeps costs and hinge wear down. A 30mm WPC door in Faridabad flats suits bedrooms, kitchens and bathrooms: it resists moisture, needs no polish and handles daily use. For main entrances, we recommend a thicker solid-core leaf.

WPC Door Frame Installation in Faridabad

Your own carpenters fix our frames with standard tools, following our 8-step installation process, and our technical team answers questions on anchoring, levelling and sealing by phone and WhatsApp. A trained fitter can trim, mortise and drill a frame in 20–30 minutes. For pre-hung door packages, our team supports on-site installation so that every door is aligned, fixed and swinging correctly before handover.

Planning a Project in Faridabad?

Send us your door schedule and site location. We'll recommend frame sections and quote a price for your project.

Or call +91 99241 32956

frequently asked questions

Answers That Build Clarity & Trust

Plain WPC frames are fixed by your own carpenters with standard tools, following our 8-step installation guide, and our technical team answers site questions by phone and WhatsApp. A trained fitter trims, mortises and drills a frame in 20–30 minutes. For pre-hung door packages in Faridabad group housing, our team supports on-site installation so every door is aligned and working before handover.

Yes. Our WPC architraves come in 45×18 mm front and 30×12 mm rear profiles, in the same painted, polished, laminated and PVC film wrapped finishes as our frames. Buying them together gives you one supplier for frame, door and trim, with the shade and wood grain matched on every opening. Unlike MDF trims, they do not swell when ground floors take on monsoon water.