WPC Door Frame Manufacturers in Shimoga

Door Frame Manufacturer Replacing the Malnad Chaukhat

As a door frame manufacturer that works only in WPC, we make the frame that teak, jackwood and matti cannot be in the Malnad: one that does not swell, grow fungus or feed termites in walls that stay wet for months. As a modern door frame manufacturer, we offer painted, polished, laminated and PVC film wrapped finishes, so owners keep a wood look without repolishing after every monsoon. The favourite WPC door frame in Shimoga's independent houses is our 150×45 mm double-rebate section for the main door, with the 100×45 mm section for rooms and the 90×38 mm single-rebate section for flats and hostels in the city.

Hollow WPC Door Frames in Shimoga

Our hollow profiles suit homestay room blocks, college hostels and rental flats around the city, where there are many internal doors and a tight budget. They are lighter to handle and quicker to fix, but just as waterproof and termite-proof as our solid sections. As a hollow WPC door frame manufacturer, we test screw-holding on every profile, and our frames hold 110–140 kgf. Homestay owners comparing hollow WPC door frame manufacturers can ask us for those figures.

Fire-Resistant and FR WPC Door Frames in Shimoga

New hospitals, colleges and commercial buildings in Shimoga need rated door assemblies at stairs and corridors for a fire NOC. As fire-resistant WPC door frame manufacturers, we make frames rated for 30, 60, 90 and 120 minutes, tested to IS 3614 (Part 2), ASTM E 119 and BS 476. As FR WPC door frame manufacturers, we supply the test certificates with every order for the NOC file.

WPC Architraves in Shimoga

We are WPC architrave manufacturers in Shimoga's building market and direct WPC architraves suppliers to its builders and homeowners, making a 45×18 mm front trim and a 30×12 mm rear trim in the same finishes as our frames. Ordering WPC door frames and architraves in Shimoga together keeps the shade and grain matched on every doorway of a large house. WPC architraves in Shimoga homes do not soften or grow mould in the monsoon the way MDF trims do, and they fix with polymer adhesive and stainless steel pin-nails in 10–15 minutes per side.

WPC Door Frame with PVC Film Wrapping

A WPC door frame with PVC film wrapping has a wood-grain film bonded on in our factory, so it comes finished from the factory and needs no polishing on site. In the Malnad, where polished timber blotches and peels in humid air, the film keeps its colour and just needs a wipe. Many owners choose a teak grain to match the look of a traditional chaukhat, and the same film is available on our architraves.

Pre-Hung Doors in Shimoga

As pre-hung door frame manufacturers, we assemble the door, frame and hinges in our factory as one ready-to-fix unit. Pre hung doors in Shimoga's homestays, hostels and apartment blocks go in within 30–45 minutes each instead of 4–6 hours of site carpentry, so rooms can be finished before the tourist season around Jog Falls begins.

Moulded Panel, Laminated, Veneered and Bathroom Doors in Shimoga

We are a moulded panel doors (MPD) manufacturer making HDF-skinned doors with a solid core in six designs and 25–50 mm thicknesses for bedrooms in houses and flats. As a moulded panel doors manufacturer, we recommend our moisture-sealed MPD grade for the damp Malnad climate. As a laminated door shades manufacturer, we supply FL-30 to FL-121 shades in 0.8–1 mm high-pressure laminate for hospitals, college blocks and offices.

For areca growers and traders who still want a timber entrance, we work as decorative veneer door manufacturers, pressing teak, walnut, oak or rosewood veneer onto a WPC core. As a decorative veneered doors manufacturer, we polish each leaf at the factory, so the wood look is kept where it shows while the core cannot rot. For wet areas, we are a bathroom door manufacturer whose WPC doors are fully waterproof and suit homestay bathrooms that face the full monsoon.

We are also hollow WPC doors manufacturers for hostels and homestay room blocks, where a lighter leaf keeps costs down. A 30mm WPC door in Shimoga homes suits bedrooms, kitchens and bathrooms: it resists the long damp, needs no polish and does not stick in humid weather. For main entrances, we recommend a thicker solid-core leaf.

WPC Door Frame Installation in Shimoga

WPC door frame installation in Shimoga is done by your own carpenters with standard tools, following our 8-step installation process. Our technical team answers questions on anchoring, levelling and sealing by phone and WhatsApp. For pre-hung door packages, our team supports on-site installation so every door is aligned, fixed and swinging correctly before handover.