WPC Door Frame Manufacturers in Kannur

Door Frame Manufacturer in Kannur for Laterite Houses and Airport-Area Projects

Red laterite walls and red lateritic soil give Kannur two problems that timber cannot solve: damp that sits in the door opening for weeks, and termites waiting in the ground below. As a door frame manufacturer working only in WPC, we give builders a frame that ignores both and needs no anti-termite treatment. We are also a modern door frame manufacturer in the finishes we offer, painted, polished, laminated or PVC film, all applied at the factory so nothing needs polishing on site. The usual WPC door frame in Kannur houses is our 100×45 mm single-rebate section; the 150×45 mm double-rebate frame, the 90×38 mm frame and the 75×35 mm section cover the other openings.

Hollow WPC Door Frames in Kannur

Hotels and apartments along the roads to Mattannur repeat the same bedroom opening many times, and that is where our hollow frames earn their place. The hollow profile is lighter than solid wood, so it is easier to handle and quicker to fix, while remaining waterproof in a laterite wall. As a hollow WPC door frame manufacturer, we give it a screw-holding strength of 110–140 kgf so hinges stay firm. When you line up hollow WPC door frame manufacturers side by side, that is the number to compare first.

Fire-Resistant and FR WPC Door Frames in Kannur

New hotels, apartment blocks and commercial buildings around the airport and in growing towns such as Thalassery and Payyanur often need rated doors before the fire NOC. As fire-resistant WPC door frame manufacturers, we make frames in 30, 60, 90 and 120-minute ratings, tested to IS 3614 (Part 2), ASTM E 119 and BS 476. As FR WPC door frame manufacturers, we supply the test certificates with every order for your consultant's file.

WPC Architraves in Kannur

MDF trims swell where they meet a damp laterite wall, but WPC architraves in Kannur homes stay flat and tight through the monsoon. We are WPC architrave manufacturers in Kannur's supply market and WPC architraves suppliers to site, making a 45×18 mm front and 30×12 mm rear profile, up to 7 feet long, in the same finishes as our frames. Ordering WPC door frames and architraves in Kannur from one plant keeps the grain and shade matched. Fixing takes 10–15 minutes per side with polymer adhesive and stainless steel pin-nails.

WPC Door Frame with PVC Film Wrapping

In the cool, wet hill towns and in coastal homes at Payyambalam or Muzhappilangad, polished timber quickly loses its shine. A WPC door frame with PVC film wrapping carries a bonded wood-grain film, so it comes finished from the factory, needs no polishing and wipes clean of mould and salt. The same film is available on our architraves.

Pre Hung Doors in Kannur

Skilled carpenters can be hard to book in Kannur, which makes pre hung doors in Kannur's hotel and apartment projects especially useful. As pre-hung door frame manufacturers, we assemble the door, frame and hinges at our factory, so each set goes in within 30–45 minutes instead of taking 4–6 hours of site carpentry, and projects near Mattannur can keep to their opening dates.

Moulded Panel, Bathroom, Laminated and Veneered Doors in Kannur

For new family houses, we are a moulded panel doors (MPD) manufacturer offering HDF-skinned, solid-core doors in single, 2-panel Oak and Horizon, 3-panel Oak and Oval, and 4-panel Mahogany designs that never need polishing. As a moulded panel doors manufacturer, we also make a moisture-sealed MPD grade for rooms next to wet areas. For bathrooms, wash areas and back doors, we are a bathroom door manufacturer in Kannur's supply chain whose waterproof WPC doors do not rot at the base in coastal or hill homes.

Handloom units, workshops and offices need a door face that takes knocks, and as a laminated door shades manufacturer we supply FL-series laminates from FL-30 to FL-121 for exactly that. For the main entrance of a Gulf-funded house or a hotel lobby, we work as decorative veneer door manufacturers, pressing teak, walnut, oak or rosewood veneer onto a WPC core. As a decorative veneered doors manufacturer, we polish every leaf at the factory in matte, semi-gloss or high-gloss.

We are also hollow WPC doors manufacturers for apartment and hotel projects, where a lighter leaf keeps handling simple. A 30mm WPC door in Kannur homes is a sound choice for bedrooms, kitchens and bathrooms because it resists moisture and needs no polish. For the main entrance, we recommend a thicker solid-core leaf.

WPC Door Frame Installation in Kannur

WPC door frame installation in Kannur is done by your own carpenter or mason's team with standard tools, following our 8-step installation process. Our technical team answers questions on anchoring frames in laterite, levelling and sealing by phone and WhatsApp. For pre-hung door packages, our team supports on-site installation, so every door is aligned and swinging correctly before handover.