WPC Door Frame Manufacturers in Rajkot

Door Frame Manufacturer for Rajkot's Homes and Industry

As a door frame manufacturer working only in WPC, we make frames that stay tight to the wall through Rajkot's long dry months, when timber shrinks and opens at the joints. As a modern door frame manufacturer, we offer painted, polished, laminated and PVC film wrapped finishes that never need a repainting cycle. The most common WPC door frame in Rajkot flats along the 150 Feet Ring Road is our 100×45 mm section for entrances and the 90×38 mm single-rebate section for bedrooms, while factory offices in Aji and Metoda often take the 150×45 mm double-rebate section for doors that are opened and shut all day.

Hollow WPC Door Frames in Rajkot

Our hollow profiles suit tenements, worker housing near the engineering clusters and rental flats on Raiya Road, where budgets per opening are tight and the counts are large. They weigh less, so they are easier to handle and quicker to fix, while staying waterproof and termite-proof. As a hollow WPC door frame manufacturer, we test every profile for screw-holding, and our frames hold 110–140 kgf. Rajkot's engineering firms like numbers, so when you compare hollow WPC door frame manufacturers, ask us for the test data.

Fire-Resistant and FR WPC Door Frames in Rajkot

Factory stores, commercial complexes, hospitals and offices in Rajkot need rated door assemblies for a fire NOC. As fire-resistant WPC door frame manufacturers, we make frames rated for 30, 60, 90 and 120 minutes, tested to IS 3614 (Part 2), ASTM E 119 and BS 476. As FR WPC door frame manufacturers, we supply the test certificates with every order so your fire consultant has the full set of documents.

WPC Architraves in Rajkot

We are WPC architrave manufacturers in Rajkot's building market and direct WPC architraves suppliers to its builders and contractors, making a 45×18 mm front trim and a 30×12 mm rear trim in the same finishes as our frames. Ordering WPC door frames and architraves in Rajkot from one supplier keeps shade and grain matched across a whole row-house scheme. WPC architraves in Rajkot homes neither shrink in the dry season nor swell in the monsoon spells like MDF, and they fix with polymer adhesive and stainless steel pin-nails in 10–15 minutes per side.

WPC Door Frame with PVC Film Wrapping

A WPC door frame with PVC film wrapping carries a wood-grain film bonded on in our factory, so it comes finished from the factory and needs no polishing. In Rajkot's strong summer sun there is no polish to crack or fade, and dust wipes off with a damp cloth. Homeowners often choose teak or walnut films, and the same film is available on our architraves.

Pre-Hung Doors in Rajkot

As pre-hung door frame manufacturers, we assemble the door, frame and hinges in our factory as one ready-to-fix unit. Pre hung doors in Rajkot's row-house and tenement schemes go in within 30–45 minutes each instead of 4–6 hours of site carpentry, which trims labour cost on budget projects and helps builders hand over sooner.

Moulded Panel, Laminated, Veneered and Bathroom Doors in Rajkot

We are a moulded panel doors (MPD) manufacturer making HDF-skinned doors with a solid core in six designs and 25–50 mm thicknesses, a good-value choice for bedrooms in flats and row houses. As a moulded panel doors manufacturer, we also offer a moisture-sealed MPD grade for rooms next to bathrooms and on ground floors. As a laminated door shades manufacturer, we supply FL-30 to FL-121 shades in 0.8–1 mm high-pressure laminate for factory offices, canteens and commercial complexes that see heavy use.

For bungalows and showrooms, we work as decorative veneer door manufacturers, pressing teak, walnut, oak or rosewood veneer onto a WPC core. As a decorative veneered doors manufacturer, we polish each leaf at the factory, so it needs no finishing on site. For wet areas, we are a bathroom door manufacturer whose WPC doors are fully waterproof and suit factory washrooms as well as homes.

We are also hollow WPC doors manufacturers for worker housing and tenements, where a lighter leaf keeps the budget down. A 30mm WPC door in Rajkot homes suits bedrooms, kitchens and bathrooms: it resists moisture, needs no polish and will not crack in the dry heat. For main entrances and busy factory offices, we recommend a thicker solid-core leaf.

WPC Door Frame Installation in Rajkot

WPC door frame installation in Rajkot is done by your own carpenters with standard tools, following our 8-step installation process. Our technical team answers questions on anchoring, levelling and sealing by phone and WhatsApp. For pre-hung door packages, our team supports on-site installation so every door is aligned, fixed and swinging correctly before handover.