WPC Door Frame Manufacturers in Hubli-Dharwad

Door Frame Manufacturer for Hubli-Dharwad Houses and Hostels

Pathframe is a door frame manufacturer that works only in WPC, which suits a twin city where timber chaukhats swell in the monsoon and then open at the joints in the dry heat of April and May. As a modern door frame manufacturer, we offer painted, polished, laminated and PVC film finishes that give a wood look without seasonal repainting. The usual WPC door frame in Hubli-Dharwad homes is our 100×45 mm single-rebate section for main doors, with the 90×38 mm or 75×35 mm sections for bedrooms, kitchens and shop back rooms, while the 150×45 mm double-rebate section suits commercial complexes and offices.

Hollow WPC Door Frames in Hubli-Dharwad

Our hollow profile is lighter to lift and quicker to cut, which helps when a Dharwad college fits out a hostel wing or a paying-guest building with dozens of rooms. As a hollow WPC door frame manufacturer, we keep the same waterproof, termite-proof material as the solid sections, so there is no compromise on damp ground floors. Unlike many hollow WPC door frame manufacturers, we publish our screw-holding figures: 110–140 kgf, enough for standard hinges, tower bolts and mortise locks.

Fire-Resistant and FR WPC Door Frames in Hubli-Dharwad

As fire-resistant WPC door frame manufacturers, we make rated frames for 30, 60, 90 and 120 minutes, tested to IS 3614 (Part 2), ASTM E 119 and BS 476. In Hubli-Dharwad they are specified for hospital wards, office blocks around the railway junction, college buildings and the stair cores of taller apartment buildings. As FR WPC door frame manufacturers, we supply the test certificates with every order so your architect can add them to the fire NOC file.

WPC Architraves in Hubli-Dharwad

We are WPC architrave manufacturers in Hubli-Dharwad's supply chain and WPC architraves suppliers to its builders and interior firms, making a 45×18 mm front profile and a 30×12 mm rear profile up to 7 feet long. WPC architraves in Hubli-Dharwad homes stay straight at the floor line, where MDF trims take up damp from mopped floors and monsoon plinths and swell. They fix with polymer adhesive and stainless steel pin-nails in 10–15 minutes per side, and when you order WPC door frames and architraves in Hubli-Dharwad from one supplier, the finish and grain on frame and trim match exactly.

WPC Door Frame with PVC Film Wrapping

A WPC door frame with PVC film wrapping has its wood-grain film bonded on in our factory, so it comes finished from the factory and needs no polishing on site. Families in Hubli-Dharwad choose teak, walnut or light oak films for living rooms and pooja rooms, and the surface wipes clean of summer dust without any repolishing. The same films are available on our architraves.

Pre-Hung Doors in Hubli-Dharwad

As pre-hung door frame manufacturers, we assemble the door, frame and hinges at our factory into one unit that is ready to fix. Pre hung doors in Hubli-Dharwad hostel blocks and staff quarters fit in 30–45 minutes each rather than the 4–6 hours that site carpentry takes, so a building with dozens of identical rooms is ready for occupants sooner.

Moulded Panel, Laminated, Veneered and Bathroom Doors in Hubli-Dharwad

We are a moulded panel doors (MPD) manufacturer offering HDF-skinned, solid-core doors in six designs and thicknesses from 25 to 50 mm, a practical choice for bedrooms in independent houses and small apartment buildings. As a moulded panel doors manufacturer, we recommend the moisture-sealed grade for ground-floor rooms on damp black-soil plinths. As a laminated door shades manufacturer, we offer FL-30 to FL-121 shades in 0.8–1 mm high-pressure laminate for rented rooms, shops and hostels that change occupants often.

For bungalows and showrooms that want real wood, we work as decorative veneer door manufacturers, pressing teak, walnut, oak or rosewood veneer onto a WPC core. As a decorative veneered doors manufacturer, we polish every leaf at the factory. For homes and hostels, we are a bathroom door manufacturer whose WPC leaves are waterproof, so daily washing does not rot them at the base.

We are also hollow WPC doors manufacturers for larger hostel and staff-quarters projects, where a lighter leaf is easier to handle and hang. A 30mm WPC door in Hubli-Dharwad homes is a common pick for bedrooms, kitchens and bathrooms because it resists moisture and needs no polish; for main entrances, we recommend a thicker solid-core leaf.

WPC Door Frame Installation in Hubli-Dharwad

Your own carpenters can fix our frames with standard tools by following our 8-step installation process, and a trained fitter trims, mortises and drills a frame in 20–30 minutes. Our technical team answers questions on anchoring, levelling and sealing by phone and WhatsApp, including how to fix frames in walls built on black cotton soil. For pre-hung door packages, our team supports on-site installation so every door is aligned and swinging correctly before handover.