WPC Door Frame Manufacturers in Salem

Door Frame Manufacturer for Salem's Factories and Family Homes

As a door frame manufacturer working only in WPC, we make frames that neither split in a 40°C Salem summer nor rot on a sago unit's wet floor. As a modern door frame manufacturer, we offer painted, polished, laminated and PVC film wrapped finishes that wipe clean of starch, dust and fibre. The most common WPC door frame in Salem family houses is our 150×45 mm double-rebate section for the main entrance, with the 100×45 mm section for room doors and the 90×38 mm single-rebate section for apartments and staff quarters.

Hollow WPC Door Frames in Salem

Our hollow profiles suit staff housing near the steel plant and engineering units, lodges for visiting traders, and rental flats, where internal doors are many and budgets tight. They are lighter to handle and quicker to fix, yet as waterproof and termite-proof as our solid sections. As a hollow WPC door frame manufacturer, we test screw-holding on every profile, and our frames hold 110–140 kgf. Contractors comparing hollow WPC door frame manufacturers can ask us for those test results.

Fire-Resistant and FR WPC Door Frames in Salem

Steel ancillaries, textile sheds and godowns stacked with yarn or sago need rated door assemblies for a fire NOC. As fire-resistant WPC door frame manufacturers, we make frames rated for 30, 60, 90 and 120 minutes, tested to IS 3614 (Part 2), ASTM E 119 and BS 476. As FR WPC door frame manufacturers, we supply the test certificates with every order so your fire consultant can close the NOC file.

WPC Architraves in Salem

We are WPC architrave manufacturers in Salem's building market and direct WPC architraves suppliers to its builders, making a 45×18 mm front trim and a 30×12 mm rear trim in the same finishes as our frames. Ordering WPC door frames and architraves in Salem together keeps the shade and grain matched on every doorway. WPC architraves in Salem homes do not swell in Yercaud mist or on damp factory floors the way MDF does, and they fix with polymer adhesive and stainless steel pin-nails in 10–15 minutes per side.

WPC Door Frame with PVC Film Wrapping

A WPC door frame with PVC film wrapping has a wood-grain film bonded on in our factory, so it comes finished from the factory and needs no polishing on site. Under Salem's hot sun there is no polish to blister, and in hill cottages the film does not blotch in the damp. Families often choose teak or rosewood films, and the same film is available on our architraves.

Pre-Hung Doors in Salem

As pre-hung door frame manufacturers, we assemble the door, frame and hinges in our factory as one ready-to-fix unit. Pre hung doors in Salem's apartment blocks, staff quarters and lodges go in within 30–45 minutes each instead of 4–6 hours of site carpentry, so rooms can be occupied sooner.

Moulded Panel, Laminated, Veneered and Bathroom Doors in Salem

We are a moulded panel doors (MPD) manufacturer making HDF-skinned doors with a solid core in six designs and 25–50 mm thicknesses, suited to bedrooms in flats and houses. As a moulded panel doors manufacturer, we also offer a moisture-sealed MPD grade for rooms that stay damp. As a laminated door shades manufacturer, we supply FL-30 to FL-121 shades in 0.8–1 mm high-pressure laminate for factory offices, lodges and textile showrooms.

For the family houses of traders and transport owners, we work as decorative veneer door manufacturers, pressing teak, walnut, oak or rosewood veneer onto a WPC core. As a decorative veneered doors manufacturer, we polish each leaf at the factory, so the main door looks like wood without a timber frame for termites to eat. For wet areas, we are a bathroom door manufacturer whose WPC doors are fully waterproof and suit sago-unit washrooms as well as homes.

We are also hollow WPC doors manufacturers for staff housing and lodges, where a lighter leaf keeps costs down. A 30mm WPC door in Salem homes suits bedrooms, kitchens and bathrooms: it resists moisture, needs no polish and holds its shape in the heat. For main entrances, we recommend a thicker solid-core leaf.

WPC Door Frame Installation in Salem

WPC door frame installation in Salem is done by your own carpenters with standard tools, following our 8-step installation process. Our technical team answers questions on anchoring, levelling and sealing by phone and WhatsApp. For pre-hung door packages, our team supports on-site installation so every door is aligned, fixed and swinging correctly before handover.