WPC Door Frame Manufacturers in Nagaland

Door Frame Manufacturer for Dimapur, Kohima and the Hill Districts

As a door frame manufacturer for a state where termites attack timber on the plains and cold, wet walls rot it in the hills, we make every section in WPC. As a modern door frame manufacturer, we offer painted, polished, laminated and PVC film wrapped finishes, so a frame looks like wood yet needs no repainting after a foggy Kohima winter. The usual WPC door frame in Nagaland homes and offices is our 100×45 mm single-rebate section for entrances, with the 90×38 mm section for bedrooms and the 150×45 mm double-rebate section for heavier doors in Dimapur shops, hospitals and government buildings. Every section is up to 7 feet long and carries a 25-year warranty against termites, warping and delamination.

Hollow WPC Door Frames in Nagaland

Hollow WPC door frames in Nagaland suit the internal doors of homestays, school hostels, staff quarters and rental apartments, where many openings share one budget. As a hollow WPC door frame manufacturer, we make a lighter profile that is simpler to handle on hillside sites in Kohima, Wokha and Zunheboto while staying waterproof through the section. Among hollow WPC door frame manufacturers, we test screw-holding, and our frames hold 110–140 kgf, enough for standard hinges and locks.

Fire-Resistant and FR WPC Door Frames in Nagaland

Hospitals, hotels, commercial blocks and apartment buildings in Dimapur and Kohima need a fire NOC from the state fire service, and consultants specify rated doors for stairwells and corridors. As fire-resistant WPC door frame manufacturers, we make frames rated for 30, 60, 90 and 120 minutes, tested to IS 3614 (Part 2), ASTM E 119 and BS 476. As FR WPC door frame manufacturers, we supply the test certificates with every order so the NOC file is complete.

WPC Architraves in Nagaland

We are WPC architrave manufacturers in Nagaland's building market and direct WPC architraves suppliers to its contractors and homeowners. Our 45×18 mm front and 30×12 mm rear profiles, up to 7 feet long, come in the same finishes as our frames and fix with polymer adhesive and stainless steel pin-nails in 10–15 minutes per side. WPC architraves in Nagaland do not swell like MDF trims in Dimapur's humid summers or Kohima's damp winters, and ordering WPC door frames and architraves in Nagaland from one maker means one supplier and a matched shade and grain on every opening.

WPC Door Frame with PVC Film Wrapping

A WPC door frame with PVC film wrapping carries a wood-grain film bonded on at our factory, so it comes finished from the factory and needs no polishing on site. For Kohima hotels and homestays getting rooms ready before the Hornbill Festival, that removes a whole polishing stage, and the film wipes clean in cold, damp weather that would dull polished timber. Our architraves come in the same film.

Pre-Hung Doors in Nagaland

As pre-hung door frame manufacturers, we assemble the door, frame and hinges at our factory into one ready-to-fix set. Pre hung doors in Nagaland fit in 30–45 minutes each instead of the 4–6 hours a site-built door takes, which matters where skilled fitters are scarce and hotels have a fixed opening date before the December festival season.

Moulded Panel, Laminated, Veneered and Bathroom Doors in Nagaland

As a moulded panel doors (MPD) manufacturer, we make solid-core doors with HDF skins in six designs and thicknesses from 25 to 50 mm for bedrooms and living rooms in Dimapur apartments and Kohima homes. As a moulded panel doors manufacturer, we recommend the moisture-sealed grade for the hills. As a laminated door shades manufacturer, we offer FL-30 to FL-121 shades in 0.8–1 mm high-pressure laminate for offices, clinics and hotel corridors where doors take daily knocks.

For government guest houses and finer homes, we work as decorative veneer door manufacturers, pressing teak, walnut, oak or rosewood veneer onto a WPC core. As a decorative veneered doors manufacturer, we polish every leaf at the factory. As a bathroom door manufacturer, we make fully waterproof WPC doors that do not rot at the base in hotel and hostel bathrooms in constant use.

We are also hollow WPC doors manufacturers for larger projects, where a lighter leaf is easier to hang. A 30mm WPC door in Nagaland homes is a sensible pick for bedrooms, kitchens and bathrooms because it resists moisture and needs no polish; for main entrances, we recommend a thicker solid-core leaf.

WPC Door Frame Installation in Nagaland

WPC door frame installation in Nagaland is carried out by your own carpenters with standard carpentry tools, following our 8-step installation process. A trained fitter can trim, mortise and drill a frame in 20–30 minutes, and our technical team answers questions on anchoring into hillside walls, levelling and sealing by phone and WhatsApp. For pre-hung door packages, our team supports on-site installation so every door is aligned and closing correctly before handover.