WPC Door Frame Manufacturers in Kanpur

Door Frame Manufacturer for Kanpur's Factories, Warehouses and Homes

We are a door frame manufacturer that makes every section in WPC, so the foot of the frame stays sound on floors that are hosed down every shift. As a modern door frame manufacturer, we finish frames in paint, polish, laminate or PVC film, and none of them blisters in sheds that pass 45°C under a metal roof. For factory and warehouse doorways, the preferred WPC door frame in Kanpur is our 150×45 mm double-rebate section; staff quarters and apartments use the 100×45 mm single-rebate section for main doors and the 90×38 mm or 75×35 mm sections inside.

Hollow WPC Door Frames in Kanpur

Labour quarters, site offices and rented housing on the city's growing edges need a lot of internal doors at a controlled cost, and our hollow frames are lighter and quicker to fit. As a hollow WPC door frame manufacturer, we use the same waterproof, termite-proof WPC as in our solid sections. For buyers weighing hollow WPC door frame manufacturers against one another, our screw-holding figure is 110–140 kgf, enough for standard hinges, hasps and locks.

Fire-Resistant and FR WPC Door Frames in Kanpur

Factories, warehouses, hospitals and taller apartment buildings in Kanpur need rated doors on staircases and exits for a fire NOC under NBC 2016. As fire-resistant WPC door frame manufacturers, we make frames rated for 30, 60, 90 and 120 minutes, tested to IS 3614 (Part 2), ASTM E 119 and BS 476. As FR WPC door frame manufacturers, we supply the certificates with every order for your fire consultant's file.

WPC Architraves in Kanpur

We are WPC architrave manufacturers in Kanpur's interiors market and WPC architraves suppliers to contractors fitting out offices, canteens and homes, with a 45×18 mm front profile and a 30×12 mm rear profile up to 7 feet long. WPC architraves in Kanpur buildings stay straight near wet floors where MDF trims swell, and they fix with polymer adhesive and stainless steel pin-nails in 10–15 minutes per side. Specifying WPC door frames and architraves in Kanpur from one supplier keeps the finish, shade and grain the same on every door.

WPC Door Frame with PVC Film Wrapping

A WPC door frame with PVC film wrapping has a wood-grain film bonded on at our factory, so it comes finished from the factory and needs no polishing on site. Offices, showrooms and new homes in areas such as Civil Lines and Kakadeo use it for a teak or walnut look that simply wipes clean, and matching film is available on our architraves.

Pre-Hung Doors in Kanpur

As pre-hung door frame manufacturers, we assemble the door, frame and hinges at our factory into one ready-to-fix unit. Pre hung doors in Kanpur staff-housing blocks and apartment projects fit in 30–45 minutes each rather than 4–6 hours of site carpentry, keeping carpenters off a busy factory site for far less time.

Moulded Panel, Laminated, Veneered and Bathroom Doors in Kanpur

As a moulded panel doors (MPD) manufacturer, we make HDF-skinned, solid-core doors in six designs from 25 to 50 mm thick, a good fit for the apartment buildings replacing Kanpur's older bungalows. As a moulded panel doors manufacturer, we offer a moisture-sealed grade for ground floors that stay humid through the monsoon. As a laminated door shades manufacturer, we supply FL-30 to FL-121 laminates in 0.8–1 mm HPL, a hard-wearing, wipe-clean finish for staff quarters and offices.

For bungalows, showrooms and management offices, we are decorative veneer door manufacturers, pressing teak, walnut, oak or rosewood veneer onto a WPC core. As a decorative veneered doors manufacturer, we polish each leaf at the factory. For washrooms, canteens and wet process areas, we are a bathroom door manufacturer whose WPC doors are waterproof and survive daily wash-downs.

We are also hollow WPC doors manufacturers for quarters and rental projects, where a lighter leaf is easier to hang and kinder to hinges. A 30mm WPC door in Kanpur homes suits bedrooms, kitchens and bathrooms because it resists moisture and needs no polish; for main entrances and busy factory doorways, we recommend a thicker solid-core leaf.

WPC Door Frame Installation in Kanpur

Your site or maintenance carpenters fix our plain frames with standard tools, following our 8-step installation process, and a trained fitter trims, mortises and drills a frame in 20–30 minutes. Our technical team answers questions on anchoring, levelling and sealing by phone and WhatsApp, including frames that sit on wash-down floors. For pre-hung door packages, our team supports on-site installation so every door is aligned and closing properly before handover.